Airtame 1 Could Not Complete Update Please Try Again

This guide will show you how to physically install the Airtame, set up up, and stream for the starting time time. The terminate goal is to have Airtame connected to your existing network so that anybody on that same network tin can stream wirelessly.

Note the Airtame 1 devices will stop receiving firmware updates afterwards Dec 31st, 2020. The Airtame i devices will keep to piece of work with the Airtame desktop app and Airtame Cloud until at least 2022.

What do you need before setting upward

1. Airtame (and all accessories in the box).

2. TV or projector.

3. WiFi network.

4. A computer: Windows, macOS, Linux.

---

Installing with an Ethernet adapter? Follow instructions in this article: Set up using an Ethernet adapter

---

1. Firmware version of your Airtame i device

It might be the case that you have non used your Airtame 1 device in a while, and are trying to set up it up over again. If yous are not able to connect to the device to set information technology upwards, delight check the firmware version of your Airtame device. It is written in the bottom right corner of the Welcome screen (on the TV/brandish that the Airtame is plugged into).

If your Airtame device's firmware version is older (a smaller number) than iii.0.0, you volition need to update the Airtame device manually, before continuing with the setup: How to manually update firmware - Airtame one.

After updating the device to the newest firmware, you should be able to connect to your Airtame device and set it up using the steps below.

• Step 1: Mounting & Powering

Airtame requires 5V-1Amp of power from a USB. This USB can exist the power adapter provided in the box or from your TV/Projector if information technology outputs 1 Amp. Your TV/projector's USB port will be labeled "5V 1A" or "USB-HDD". (If it says "service," however, this will non piece of work).

Employ the provided HDMI extension cord to fit Airtame in tight spots or to go the Airtame closer to the edge of the screen for ameliorate WiFi signal forcefulness. Illustrated on the right moving-picture show higher up.

• Step 2: Configuring Airtame

Turn the TV on to the correct HDMI source and you lot volition be asked to download and install the Airtame app

The Airtame app will discover new devices when they are nearby and let y'all to set them up with just a few clicks. Settings are sent through WiFi so your computer will temporarily switch to Airtame's WiFi to transfer these initial configurations.

1. Open the Airtame app.

2. Look until y'all see the blue "Set up" button appear next to your new Airtame's name and click on it.

3. Enter a proper noun for your Airtame.

4. Cull if you lot would like to set up a password for the Airtame device'southward Settings and the Airtame device'southward own Access Points. Yous can also skip this step and individual passwords for the access signal and device settings later from device settings afterwards setup is complete.

5. Choose between connecting your device to your WiFi, Ethernet (wired network), or Ad-hoc.

6. If you chose WiFi, select your network from the list of nearby WiFi'south . (Select 5GHz over two.4GHz whenever available).

7. Wait for the confirmation to show on the Television receiver screen.

8. For additional configuration, go to the device settings.

• Stride 3: Streaming

Check out how to stream from Windows, macOS, Linux, Chromebook, Android and iOS, in our Using Airtame Aid middle manufactures or have a look at our instructional videos well-nigh Presenting with Airtame.

• Footstep iv: Manage your device

1. Go to airtame.cloud.

2. Fill out the Organization name and press "Side by side".

3. Fill out your email address and password.

4. Press "Create business relationship".

5. Click on "Add Airtame".

6. Select the grouping you would like to add your Airtame to.

7. Click the "Copy" button or manually copy the code in the box.

• Add the lawmaking to your Airtame device:

1. Open the Airtame device settings through the App.

2. Paste the token under "Cloud token".

3. Click the "Apply changes" button.

Your Airtame volition prove up subsequently a few seconds on your Airtame Cloud account. If yous can't see the device'south name, please check our Airtame Cloud-Troubleshooting commodity.

Stride 5: Customizing

You can go along customizing your device past going to Airtame device settings

1. Cheque for updates

2. Fix a custom background

3. Configure Airtame'southward own WiFi

4. Reset to factory settings

---

2. Changing networks on your Airtame device

Y'all might need to connect your Airtame again to a WiFi network because of the following reasons:

• You are unable to access the device settings.

• The name of your network has inverse (SSID).

• You lot movement the Airtame to a different location.

• You are taking the Airtame for a remote presentation.

Here is how you tin re-connect or change the WiFi network of your Airtame device: How to connect Airtame to a WiFi network

iii. End of life

Airtame 1 devices will stop receiving firmware updates afterwards December 31st 2020. The Airtame 1 devices will continue to work with the Airtame desktop app and Airtame Cloud until at least 2022.

---

Acquire more

• Advanced setup: Deployment Guide

• Improve Streaming

• Learn how to stream from different devices: Using Airtame

• Setting upwards multiple Airtames? Check the tips on how to speed it up.

---

You tin can write to us using the bluish chat box in the lower correct corner or send an email to [email protected] and we will be hither to assist you.

If you are facing technical bug, remember to include Airtame device logs in your message.

for product updates to stay posted on future features.

owensbyobsed1973.blogspot.com

Source: https://help.airtame.com/en/articles/1205605-setup-guide-for-airtame-1

Share this post